|
|
|
|
|
|
|
|
|
|
| |
|
Edge
Banding Machines
|
|
|
| |
|
|
|
RAM
|
- TAPES 0.4-2 mm.
- Glue pot with stand-by program.
- Pressure rollers.
- End cutting unit with pneumatic guillotine.
- Top and bottom trimming unit.
|
|
- TECHNICAL DATA -
| Min/max edgeband thickness |
0.4-2 mm
|
| Min/max panel thickness |
10-50 mm
|
| Working speed |
4.5 m\min
|
| Tools rotation speed |
9000 rpm
|
| Pneumatic pressure |
6 bar
|
| Installed power |
3.5 Kw
|
| Electrical supply |
As Required
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All the property's of the RAM with an added
feature of the buffer.
|
|
|
|
|
|
|
|
- TAPES 0.4-2 mm.
- Glue pot with stand-by program.
- Pressure rollers.
- End cutting unit with circular saws.
- Top and bottom trimming unit.
|
|
- TECHNICAL DATA -
| Min/max edgeband thickness |
0.4-2 mm
|
| Min/max panel thickness |
10-40 (end trimmer) \ 10-50 (top-bottom
trimmer)
|
| Working speed |
4.5 m\min
|
| Tools rotation speed |
9000 rpm
|
| Pneumatic pressure |
6 bar
|
| Installed power |
3.5 Kw
|
| Electrical supply |
As Required
|
|
|
|
|
|
|
|
BACK TO THE TOP
|
|
RAM 2 SP
|
|
All the property's of the RAM 2 with an added
feature of the buffer.
|
|
|
|
|
|
|
|
|
|
- TECHNICAL DATA -
|
|
- TAPES 0.4-2 mm.
- Glue pot with stand-by program.
- Pressure rollers.
- End cutting unit with circular saws.
- Top and bottom trimming unit.
- Edge scraper.
- Buffing unit.
|
|
| Min/max edgeband thickness |
0.4-2 mm
|
| Min/max panel thickness |
10-40 mm
|
| Working speed |
6 m\min
|
| Tools rotation speed |
9000 rpm
|
| Pneumatic pressure |
6 bar
|
| Installed power |
3.5 Kw
|
| Electrical supply |
As Required
|
|
|
|
|
|
|
|
|
|
|
|
BACK TO THE TOP
JUMP
|
| |
|
|
|
- TAPES 0.4-3 mm.
- Motorized tape feeding.
- Glue pot with stand-by program.
- Pressure rollers.
- End cutting unit with circular saws.
- Top and bottom trimming unit.
|
|
| Min/max edgeband thickness |
0.4-3 mm
|
| Min/max panel thickness |
10-40 (end trimmer) \ 10-50 (top-bottom
trimmer)
|
| Working speed |
6 m\min
|
| Tools rotation speed |
9000 rpm
|
| Pneumatic pressure |
6 bar
|
| Installed power |
3.5 Kw
|
| Electrical supply |
As Required
|
|
|
|
|
|
|
BACK TO THE TOP
|
|
JUMP 2
|
All the property's of the Jump, with the added features of
a scraper & a buffer.
|
|
|
|
|
|
|
|
BACK TO THE TOP
NEK 3
|
|
- TAPES 0.4-3 mm.
- Motorized tape feeding.
- Glue pot with stand-by program.
- Pressure rollers.
- End cutting unit with circular saws.
- Top and bottom trimming unit
- Edge scraper.
- Buffing unit.
|
|
| Min/max edgeband thickness |
0.4-3 mm
|
| Min/max panel thickness |
10-50
|
| Working speed |
6 m\min
|
| Tools rotation speed |
9000 rpm
|
| Pneumatic pressure |
6 bar
|
| Installed power |
5 Kw
|
| Electrical supply |
As Required
|
|
|
|
|
|
|
BACK TO THE TOP
|
|
NEK 8
|
|
AUTOMATIC EDGEBANDER WITH HOT MELT GLUE 0.4-8 mm - range of
7 available configurations to give solutions for every exigency
adding particular units and a patent for changing profile of
trimming from flat to radious in a few seconds:
- Automatic loading magazine.
- Tank for liquid spray.
All models are equipped with high frequency motors and PLC.
|
|
|
|
|
|
|
All data in this web site is for informational purpose
only, it's not binding and is subject to change without notice.
|
|
All Rights Reserved Copyright ©
2001 AMS MACHINERY LIMITED. ™
|
